|
Features: -
Ø The
Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material and Does Not
Drop Powder in High Temperature; Heat Capacity Is Small, Energy Saving Above
50%.
Ø The
Heating Element Is Made of High-Quality Silicon Carbide Rod, Which Can Bear
Large Load, Stable and Long Service Life; The Silicon Carbide Rod Is Evenly
Arranged on Both Sides of The Furnace, And the Temperature Field Uniformity
Is Good.
Ø The
Heating Rate Is Fast, generally 0-15℃/Min
to Be Set Freely.
Ø High
Precision of Temperature Accuracy ±1°C.
Ø Using
Intelligent PID Temperature Control Instrument, with 1 Program Function, Can
Set the Temperature Rise Curve, Can Be Programmed 16 Segments.
Ø Electronic
Components Are Used Such as Autonics / Schneider / L&T Brand, It’s Safe
and Reliable.
Ø The
Machine Will Send Out an Alarm Signal to The Over-Temperature During the
Working Process, And Automatically Complete the Protection Action.
Ø When
the Instrument Program Is Set, Just Press the Run Button and The Next Work
Will Be Completed Automatically.
Product Overview: -
HE-MF
1400℃ Series Products Are Mainly for The Daily
Application Development of The Laboratory, High-Quality Furnace Materials and
Stable Temperature Control System to Ensure the Reliability of The
Experimental Data; The Product Uses High-Purity Alumina Material as The
Furnace Material, And the High-Quality Silicon Carbide Rod Is Used for
Heating Element, And Programmable Temperature Controller PID Module to
Achieve Precise Temperature Control and Constant Temperature Requirements.
Specification: -
|
Type
|
Floor
|
|
|
Furnace Structure
|
Alumina
Ceramic Chamber, Programmable Temperature Control System, Heating Element,
Furnace Shell, Main Electric Parts and Other Relative Accessories.
|
|
|
Max Temperature
|
1400℃
|
|
Continue Operating Temp.
|
1350℃
|
|
Heating Element
|
Quality
Silicon Carbide Rod (Sic) Heater
|
|
|
Chamber Material
|
High
Temperature 1500 Type Alumina Ceramic Fiber Material
|
|
|
Temperature Accuracy
|
±1℃
|
|
|
Thermocouple
|
R type (Pt-Rh) with 99.7% purity Alumina tube
|
|
|
Temperature Controller
|
Ø PID automatic control
via SSR power control with phase angle fired, current limiting resistor.
Ø 1 programmable x 16
segments for precise control of heating rate, cooling rate and dwell time.
Ø Built in PID Auto-Tune
function with overheating & broken thermocouple broken protection for
this Muffle Furnace 1400 type.
Over temperature
protection and alarm allows for operation without attendant
|
|
|
Electronic Component
|
Autonics /
Schneider / L&T Electronics Brands
|
|
|
Heating Rate
|
≤ 15℃/Min (Suggest 10℃/Min for
Longer Life Using of Furnace)
|
|
|
Safety Protection
|
Overheat and
Thermocouple-Break Alarm
|
|
|
Certification
|
NSIC REGD, ISO 9001- 2015/13485- 2016/FDA/GMP/CE CERTIFIED
|
|
|
Furnace Shell
|
High Quality
GI Sheet with PP Powder Coated
|
|
|
Insulation
|
High Quality
Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good
Uniformity
|
|
|
Accessories
|
One Pair of
High Temperature Furnace Gloves
One No of
Crucible and Tong and Operational Manual
|
|
|
Optional
|
Quartz /
Alumina Crucible
|
|
|
Using Attentions
|
Ø The cooling rate for this Muffle Furnace
1200 type shall also not exceed 10℃ /min.
Ø Toxic or explosive gases are not
recommended for use with this furnace without necessary safety controls and
supervision.
Ø Small cracks may appear on the surface of
the refractory ceramics over extended use.
Ø This is a normal occurrence and the
cracks may be repaired with alumina coating.
Refractory door block must be inserted
before closing door.
|
|
|
Warranty
|
Ø One-year limited warranty for Industrial Furnace with
lifetime support. (Consumable parts such as heating elements and Sensor,
crucibles are not covered by the warranty, please order the replacement at
related products)
ATTENTION: Any damages caused by the use of corrosive and acidic
gases are not under the coverage of One Year Limited Warranty.
|
|
|
