FUME HOOD

Customized Fume Hoods for Your Laboratory: - 

Make: HE (WHO-GMP / ISO 9001 – 2015 / CE Mark) 

Harrier Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct. Chemical fume hood, fume cupboard and fume closet are similar names of fume hood.

WORKING CHAMBER

Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304) which is further coated with FRP layer if needed. The Sizes of chamber are 6 ft x 2 ft x 2 ft etc.

WORK BENCH

The work bench of fume hood is either made of granite marble. 

EXTERNAL SURFACE

External surface is either made of stainless-steel sheet (304). 

SERVICE VALVES

Service valves are added (02 Nos) Both Sides we can fit wet and dry service valves (brass needle valves) for raw water, nitrogen gas, air and vacuum.

ELECTRICAL UTILITIES

To run the apparatus inside fume hood, we fit electrical sockets 4 x 3.

SASH                                                     

It is a glass window mechanism which is moved up and down using sash track. Sash track is a system made of weights and a pulley. Operator can easily move sash up or down and keep at desired height during work.

BLOWER

For suction in fume hood, we provide centrifugal blower assemble made of direct drive motor of any branded make.

CHEMICAL STORAGE CABINET

At the bottom of fume hood, we provide ventilated cabinet to store chemicals.

 Technical Specifications

Inner chamber:  SS 304

Exterior:   Stainless Steel

Work top:   Jet black granite

Illumination:  Fluorescent tube light (02 Nos)

Blower: Centrifugal exhaust blower (direct drive motor)

Standard fittings:  Water tap

                              Sink with drainage system

                              Electrical sockets

Inner Working Dimension (ft.): 4’ x 2’ x 3’