. The Furnace Material Is Vacuum-Formed Alumina Ceramic Fiber Material And Does Not Drop Powder In High Temperature, Heat Capacity Is Small, Energy Saving Above 50%. 2. The Heating Element Is Made Of High-Quality Alloy Wire, Which Can Bear Large Load, Stable And Long Service Life. 3. The Heating Rate Is Fast, From Room Temperature To 1150 Degrees, Generally Takes 45 Minutes. 4. High Precision of Temperature Control, Small Temperature Compensation and Temperature Accuracy ± 1 ° C. 5. PID automatic control via SSR power control with phase angle fired, current limiting resistor. 6. 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. 7. Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type. 8. Over temperature protection and alarm allows for operation without attendant 9. Electronic Components Are Used Such As Autonics / Schneider / L & T Brand, It’s Safe And Reliable. 10. The Machine Will Send Out An Alarm Signal To The Over-Temperature During The Working Process, And Automatically Complete The Protection Action. 11. When The Instrument Program Is Set, Just Press The Run Button And The Next Work Will Be Completed Automatically. PRODUCT OVERVIEW: HE-MF-1200°C Series Products Are Mainly For The Daily Application Development Of The Laboratory, High-Quality Furnace Materials And Stable Temperature Control System To Ensure The Reliability Of The Experimental Data; The Product Uses High-Purity Alumina Material As The Furnace Material, And The High-Quality Alloy Resistance Wire Is Used For Heating Element, And The Temperature Controller Uses Microprocessor PID Control Module To Achieve Precise Temperature Control And Constant Temperature Requirements. MUFFLE FURNACE 1200°C +91 9278334734 harrierprince@gmail.com www.harriergroups.com MUFFLE FURNACE : 950°C to 1200°C Model Maximum Temperature Working Temp. Range Temp. Accuracy Heating Element Power Supply : HE-MF-1200P : Upto 1200°C : Upto 1150°C : ±1°C : Heating Element are made of KANTHAL “A-1" wire in coil form : 415 volts, three phase AC supply
