1200 Degree Three Zone Tube Furnaces

July 28, 2024

Product Overview:-

HE – Three Zone Tube Furnace - 1200℃ Series Products Are Mainly Applied For The Heat Treatment Of Samples Under Vacuum Or Protective Atmosphere, High Quality Chamber Materials And Stable Temperature Control System Ensure The Reliability Of Experiment. The Product Uses The Zirconia Grade Ceramic Fiber Material As The Furnace Chamber Material; The Furnace Tube Material Is Fine, And The Tube Is Sealed By Light Weight Aluminium Flanges On Its Both Ends, The Furnace Can Be Work Under The Vacuum, There Are Air Inlet And Air Outlet On The Flange, Also It Can Be Filled In Protective Air, The Precision Needle-Valve May Adjust The Air Inlet Flow Rate.

Specification:-

Type	Three Zone CVD System
Max Temperature Zone -1	1200℃
Continue Operating Temp. Zone - 1	1150℃
Max Temperature Zone -2	1200℃
Continue Operating Temp. Zone - 2	1150℃
Max Temperature Zone -3	1200℃
Max Temperature Zone -3	1150℃
Heating Element	Kanthal “A-1” Wire in Coil Form
Insulation	First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket. High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity
Temperature Accuracy	±1℃
Thermocouple	K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube
Temperature Controller	PID automatic control via SSR power control with phase angle fired, current limiting resistor. 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type. Over temperature protection and alarm allows for operation without attendant
Electronic Component	Autonics / Schneider / L&T Electronics Brands
Heating Rate	≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace)
Safety Protection	Overheat And Thermocouple-Break Alarm
Certification	NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified
Furnace Shell	High Quality GI Sheet With PP Powder Coated
Accessories	One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual
Optional	Alumina / Alumina Bot/Gas Bubbler
Warranty	One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.
Using Attentions	The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min. Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence