1400 Degree Single-Zone Tube Furnace

July 28, 2024

Product Overview:-

1400℃ SZSTF Series products are mainly applied for the heat treatment of samples under vacuum or protective atmosphere, Quality Kanthal A1” wire in Coil Form is used for heating element, and the temperature controller uses PID control module to achieve precise temperature control and constant temperature requirements. The product uses the new-type ceramic fiber material as the furnace chamber material; the furnace tube material is corundum, and the tube is sealed by stainless steel flanges on its both ends, the furnace can be work under the vacuum atmosphere condition, there are air inlet and air outlet on the flange, also it can be filled in protective air, the precision needle-valve may adjust the air inlet flow rate.

Specification:-

Type	Tube Furnace
Furnace Structure	Chamber Material, Temperature Controller System, Heating Element, Furnace Shell And Other Assistant Parts.
Max Temperature	1400℃
Continue Operating Temp.	Room Temp- To 1350℃
Heating Element	Silicon Carbide Heating elements
Chamber Material	High Temperature Zirconia Grade Ceramic Fiber Material
Temperature Accuracy	±1℃
Thermocouple	K Type
Temperature Controller	PPI (India) PID Controller Can Program 1 Group 16 Segments
Electronic Component	Autonics / Schneider / L&T Electronics Brands
Heating Rate	≤ 1-15℃/Min (Suggest1-10℃/Min for Longer Life Using of Furnace)
Safety Protection	Overheat And Thermocouple-Break Alarm
Certification	NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED
Furnace Shell	High Quality GI Sheet With PP Powder Coated
Insulation	High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure a Good Uniformity
Accessories	One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual
Optional	Quartz / Alumina Bot
Warranty	The cooling rate of this High Temp Tube Furnace 1800 type shall also not exceed 8℃ /min. Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence