Type | Table Top Model |
Furnace Structure | Alumina Ceramic Chamber, Programmable Temperature Control System, Heating Element, Furnace Shell, Main Electric Parts and Other Relative Accessories. |
Max Temperature | 1400℃ |
Continue Operating Temp. | 1350℃ |
Heating Element | Quality Silicon Carbide Rod (Sic) Heater |
Chamber Material | High Temperature 1500 Type Alumina Ceramic Fiber Material |
Temperature Accuracy | ±1℃ |
Thermocouple | R Type |
Temperature Controller | Using Intelligent PID Temperature Control Instrument, With 1 Program Function, Can Set The Temperature Rise Curve, Can Be Programmed 16 Segments. |
Electronic Component | Autonics / Schneider / L&T Electronics Brands |
Heating Rate | ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) |
Safety Protection | Overheat And Thermocouple-Break Alarm |
Certification | NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED |
Door | Manual |
Furnace Shell | High Quality GI Sheet With PP Powder Coated |
Insulation | High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity |
Accessories | One Pair of High Temperature Furnace Gloves One No of Tong and Operational Manual |
Warranty | - One-year limited warranty for this Heat Treatment Furnace.
- Furnace type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products)
ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. |
Optional | Quartz / Alumina Crucible |
Using Attentions | - The cooling rate for this Heat Treatment Furnace 1400 type shall also not exceed 15℃ /min.
- Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use.
- This is a normal occurrence and the cracks may be repaired with alumina coating.
Refractory door block must be inserted before closing door. |
