Smart locks
promise keyless entry, guest codes, and remote control from your phone. What
the marketing rarely mentions is that a smart lock still has to physically fit
the door you own. Buy the wrong model and you are left with a box that will not
mount, a bolt that will not line up, or an app that connects to nothing. Your
Key Maker reviews the door, frame, and power situation before installing,
and you can do a surprising amount of that homework yourself before you ever
open a product page.
Why Fit Matters More Than Features
It is easy to
choose a smart lock based on its app, its finish, or its voice-assistant
support. Those features only matter if the hardware seats correctly in your
existing door. A lock that does not fit will feel loose, bind against the
frame, or fail to throw the bolt fully, and a bolt that does not extend all the
way is a security problem no app can solve. Fit first, features second.
The Five Measurements That Decide
Compatibility
Before you
buy, check these five things. Most can be measured with a tape measure in a
couple of minutes.
Backset
The backset is
the distance from the edge of the door to the centre of the bore hole where the
lock sits. In North America this is almost always 2 3/8 inches or 2 3/4 inches.
Many smart locks adjust between the two, but confirm your measurement matches
the range the product lists.
Bore hole and cross-bore
The bore hole
is the large round cut-out that holds the lock body, typically about 2 1/8
inches across. Some smart locks also rely on a smaller cross-bore drilled
through the edge of the door for the bolt. If your door has a non-standard or
oversized bore, not every lock will cover it cleanly.
Door thickness
Standard
exterior doors are usually between 1 3/8 and 1 3/4 inches thick. Smart locks
are built for a thickness range, and a door that is thicker or thinner than
expected can leave the mounting screws too short or the lock unable to clamp
tight.
Handing and latch type
Handing refers
to whether your door is left or right hung and which way it swings. Many
deadbolt-style smart locks are handing-neutral, but handle-and-lever models
often are not. You also need to know whether you are replacing a deadbolt, a
knob, or a mortise-style lock, because each is a different product category.
Power and connectivity
Smart locks
run on batteries, and most communicate by Bluetooth, Wi-Fi, or a hub. Think
about where the nearest reliable signal reaches, because a lock on a detached garage
or a far corner of the house may not hold a stable connection to your router.
Deadbolt Replacement vs. Retrofit Models
There are two
broad types of smart lock. A full replacement model swaps out the entire
deadbolt, interior and exterior. A retrofit model keeps your existing exterior
deadbolt and key, replacing only the interior thumb-turn with a motor. Retrofit
units are appealing because you keep your current keys, but they depend on your
existing deadbolt being in good condition. If that lock is worn or you simply
want fresh keys, it can make sense to rekey the
existing locks at the same time so every door shares one key before the
smart layer goes on top.
When to Bring In a Pro
Plenty of
smart locks are sold as do-it-yourself, and on a standard, well-prepped door
they install easily. The trouble starts when the door is older, the bore is
non-standard, the door has sagged on its hinges, or the bolt does not line up
with the strike. In Ottawa's older homes especially, decades of settling can
mean the door no longer sits square in the frame. A technician can correct the
alignment, adjust the strike, and confirm the bolt throws fully. If you are
weighing a smart lock against traditional hardware, comparing it with a
straightforward deadbolt
installation can help you decide what each door really needs.
Frequently Asked Questions
How do I
measure the backset on my door? Open the door, measure from the edge to the centre of the
existing lock hole. It will almost always be close to 2 3/8 or 2 3/4 inches.
Match that to the range the smart lock lists.
Can I keep
my existing keys with a smart lock? With a retrofit model, yes, because it reuses your current
exterior deadbolt and key. A full replacement model comes with its own keys.
Your Key Maker can explain which approach suits your door during the visit.
Will a
smart lock work on an old door? Often, but older doors may need alignment work or a
non-standard bore addressed first. A sagging door or a misaligned strike can
stop the bolt from throwing fully, which a technician can correct during
installation.
What
happens if the batteries die? Most smart locks warn you well in advance and include a
physical key override or an external power contact. Keeping a backup key
accessible and replacing batteries on schedule avoids being locked out.
Do I need
Wi-Fi for a smart lock to work? Not always. Many locks work over Bluetooth for local control
and only need Wi-Fi or a hub for remote features. Consider how strong your
signal is at that specific door before relying on the remote functions.