High Temperature MuffleFurnace 1800°C

Type

Benchtop

Furnace Structure

Chamber Material, Temperature Controller System, Heating Element, Furnace Shell And Other Assistant Parts

Max Temperature

1700℃

Continue Operating Temp.

1600℃

Heating Element

High Quality Molybdenum Disilicide (MoSi2 ) heater 

Chamber Material

High Temperature1800 Grade Ceramic Fiber Material

Temperature Accuracy

±1℃

Thermocouple

B Type

Temperature Controller

• PID automatic control via SSR power control with phase angle fired, current limiting resistor.
• 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
• Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.
• Over temperature protection and alarm allows for operation without attendant.

Electronic Component

Autonics / Schneider / L&T Electronics Brands

Heating Rate

≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace)

Safety Protection

Overheat And Thermocouple-Break Alarm

Certification

 NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED

Furnace Shell

High Quality GI Sheet With PP Powder Coated

Insulation

High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity

Accessories

One Pair of High Temperature Furnace Gloves

One No of Crucible and Tong and Operational Manual

Using Attentions

• The cooling rate for this Muffle Furnace 1700 type shall also not exceed 10℃ /min.
• Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
• Small cracks may appear on the surface of the refractory ceramics over extended use.   
• This is a normal occurrence and the cracks may be repaired with alumina coating.

Refractory door block must be inserted before closing door.

Warranty

• One-year limited warranty for this Muffle Furnace 1700 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products)

ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.